Get started with Arduino [C3 series]
==================================================

Requirements
---------------
  * `Python <https://www.python.org/downloads/>`_
  * `Arduino IDE <https://www.arduino.cc/>`_

Installing Hardware package
-----------------------------
  * `esp32 arduino package <https://github.com/espressif/arduino-esp32>`_ 


Configure Board
-------------------
  * Use lastest `esp32 arduino package`_ 
  * Choose board **LOLIN C3 MINI**


Upload Code
-----------------
* Make C3 boards into **Device Firmware Upgrade (DFU)** mode.

  * Hold on **Button 9**
  * Press **Button Reset**
  * Release **Button 9** When you hear the prompt tone on usb reconnection
 


Documentation
-------------------------
  * `ESP32-S2 and ESP32-C3 Support <https://github.com/espressif/arduino-esp32#esp32-s2-and-esp32-c3-support>`_